Volume XXXIX-B1
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XXXIX-B1, 361-366, 2012
https://doi.org/10.5194/isprsarchives-XXXIX-B1-361-2012
© Author(s) 2012. This work is distributed under
the Creative Commons Attribution 3.0 License.
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XXXIX-B1, 361-366, 2012
https://doi.org/10.5194/isprsarchives-XXXIX-B1-361-2012
© Author(s) 2012. This work is distributed under
the Creative Commons Attribution 3.0 License.

  24 Jul 2012

24 Jul 2012

AERIAL IMAGES FROM AN UAV SYSTEM: 3D MODELING AND TREE SPECIES CLASSIFICATION IN A PARK AREA

R. Gini1, D. Passoni2, L. Pinto2, and G. Sona1 R. Gini et al.
  • 1Geomatics Laboratory at Como Campus, DIIAR, Politecnico di Milano, Como, Italy
  • 2DIIAR, Politecnico di Milano, Milano, Italy

Keywords: Cultural Heritage, Vegetation, Classification, Triangulation, Infrared, DEM/DTM, Multisensor

Abstract. The use of aerial imagery acquired by Unmanned Aerial Vehicles (UAVs) is scheduled within the FoGLIE project (Fruition of Goods Landscape in Interactive Environment): it starts from the need to enhance the natural, artistic and cultural heritage, to produce a better usability of it by employing audiovisual movable systems of 3D reconstruction and to improve monitoring procedures, by using new media for integrating the fruition phase with the preservation ones. The pilot project focus on a test area, Parco Adda Nord, which encloses various goods' types (small buildings, agricultural fields and different tree species and bushes). Multispectral high resolution images were taken by two digital compact cameras: a Pentax Optio A40 for RGB photos and a Sigma DP1 modified to acquire the NIR band. Then, some tests were performed in order to analyze the UAV images' quality with both photogrammetric and photo-interpretation purposes, to validate the vector-sensor system, the image block geometry and to study the feasibility of tree species classification. Many pre-signalized Control Points were surveyed through GPS to allow accuracy analysis. Aerial Triangulations (ATs) were carried out with photogrammetric commercial software, Leica Photogrammetry Suite (LPS) and PhotoModeler, with manual or automatic selection of Tie Points, to pick out pros and cons of each package in managing non conventional aerial imagery as well as the differences in the modeling approach. Further analysis were done on the differences between the EO parameters and the corresponding data coming from the on board UAV navigation system.