The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XLVI-5/W1-2022
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLVI-5/W1-2022, 199–204, 2022
https://doi.org/10.5194/isprs-archives-XLVI-5-W1-2022-199-2022
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLVI-5/W1-2022, 199–204, 2022
https://doi.org/10.5194/isprs-archives-XLVI-5-W1-2022-199-2022

  03 Feb 2022

03 Feb 2022

IFC DATA MAPPING BASED ON A PARAMETRIC BIM CODING FOR AN EFFICIENT WORKFLOW IN THE QUANTIFICATION AND MANAGEMENT OF CONSTRUCTION COSTS

R. Ruano-Ruiz, J. E. Nieto-Julián, and J. Moyano R. Ruano-Ruiz et al.
  • Dept. of Graphic Expression and Building Engineering, Higher Technical School of Building Engineering, University of Seville, 4A Reina Mercedes Avenue, 41012, Seville, Spain

Keywords: Building Information Modeling (BIM), IFC, Open BIM, Quantification, Management of Construction Costs

Abstract. In recent years there has been a great effort by the agents of the AECO sector aimed at an efficient use of data interoperability between the participating disciplines and the applicability in the specific software. In this context, the BIM (Building Information Modeling) methodology, moves in a collaborative data management environment to monitor and control the design, planning, cost control, construction processes. and building maintenance. But to enjoy the benefits of BIM in its fifth dimension (5D), cost and time savings, it is essential to properly plan each phase of the project and manage the information effectively within the same team.

Therefore, this research aims to validate an effective method for the creation of the information of a constructive entity using codes, disaggregated by budget line items, necessary for the mapping of data in the structure of the IFC file (Industry Foundation Classes) and the confrontation with the filtering rules in quantification programs, in 1 to 1 relationship. Under normal conditions, the item to be measured would have a quality or parameter that distinguishes it from another item. All elements are mapped following an IFC structure using the eCOB standard. This information will be collected in the quantification program to compare it with the information established in the rule corresponding to each item.

The analyzed and tested method, based on a proper structuring and classification of data of the elements that make up the BIM model, has been productive and efficient in avoiding random decision-making by the operator who analyzes the quantifications and that may lead to errors or inaccuracies when applying the metric. The result of the study shows that the combinations of parameters, influences by the possible variables of the constructive element, can be considerably reduced. The percentage of rules would decrease by a ratio of 17/120 in the IFC information mapping process to be validated in quantification and valuation software, improving data exchange and interoperability in an international environment.