The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XLVI-5/W1-2022
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLVI-5/W1-2022, 1–6, 2022
https://doi.org/10.5194/isprs-archives-XLVI-5-W1-2022-1-2022
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLVI-5/W1-2022, 1–6, 2022
https://doi.org/10.5194/isprs-archives-XLVI-5-W1-2022-1-2022

  03 Feb 2022

03 Feb 2022

3D MODELING OF SATBAYEV UNIVERSITY BASED ON LASER SCANNING AND UAV DATA

B. Adebiyet1, F. A. Iliuf1, E. Orynbassarova1, A. Chernov1, and K. Idrissov2 B. Adebiyet et al.
  • 1KazNITU, Mining, and Metallurgical Institute. O. A. Baikonurova, Almaty, Kazakhstan
  • 2Leica Geosystems Kazakhstan, Almaty, Kazakhstan

Keywords: laser scanning, point cloud, post-processing algorithm, UAV, 3D model, GNSS, Satbayev University

Abstract. The article describes one of the fastest growing and important areas of information technology – the 3D modeling of buildings and structures. In particular, the results of the work performed when creating a three-dimensional model of Satbayev University, which is the first technical university in the Republic of Kazakhstan, are considered. The main goal of the work is to create an interactive three-dimensional model of the university building based on laser scanning data and aerial photography from an unmanned aerial vehicle (UAV). A detailed 3D model was built by combining images taken from the DJI Phantom 4 Pro UAV and a dense point cloud obtained from the Leica RTC360 laser scanner. Based on the work performed, the advantages and disadvantages of the integrated use of these techniques were evaluated. The results obtained are planned to be integrated with AR / VR technologies, BIM, GIS, and web mapping.