The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XLVI-4/W4-2021
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLVI-4/W4-2021, 111–117, 2021
https://doi.org/10.5194/isprs-archives-XLVI-4-W4-2021-111-2021
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLVI-4/W4-2021, 111–117, 2021
https://doi.org/10.5194/isprs-archives-XLVI-4-W4-2021-111-2021

  07 Oct 2021

07 Oct 2021

DATA INTEROPERABILITY OF BUILDING INFORMATION MODELING AND GEOGRAPHIC INFORMATION SYSTEM IN CONSTRUCTION INDUSTRY

W. N. F. W. A. Basir, U. Ujang, Z. Majid, and S. Azri W. N. F. W. A. Basir et al.
  • Faculty of Built Environment and Surveying, Universiti Teknologi Malaysia, Johor, Malaysia

Keywords: Building Information Modelling, Geographic Information System, Data Interoperability, Construction Industry

Abstract. Application of Building Information Modeling (BIM) in construction industry has been applied for many years back. This because BIM can provide a better advantage in construction industry in term of controlling and managing construction project during their life cycle. The advantages that can be provide by BIM is focusing on the indoor planning tasks. But, when the construction project involves, besides indoor planning, outdoor planning also is important part that need to be look up. To cover the outdoor planning in construction project, Geographic Information System (GIS) need to be applied. GIS can overcome this problem because GIS mainly for outdoor planning by using their spatial analysis. GIS can offer a high degree of geospatial information and can provide the detailed geometrical and semantic information of building to assisted across improve automation. Towards produce the improved preparation in construction project, BIM and GIS should be integrated. To integrate both domains, the data interoperability between them need to be investigate because they used different data standard. This study focusses on solving the data interoperability through the data integration between BIM and GIS to solve the problem of data mismatch and data missing during data translation process. Industry Foundation Classes (IFC) was used as a data standard to perform the data integration between BIM and GIS. The outcomes from this study show that when the data interoperability applied between BIM and GIS, the problem above can be solved, and the data dimension and their coordinate system also can be control.