The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XLVI-4/W3-2021
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLVI-4/W3-2021, 281–286, 2022
https://doi.org/10.5194/isprs-archives-XLVI-4-W3-2021-281-2022
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLVI-4/W3-2021, 281–286, 2022
https://doi.org/10.5194/isprs-archives-XLVI-4-W3-2021-281-2022
 
11 Jan 2022
11 Jan 2022

TRIANGULAR MESH APPROACH FOR AUTOMATIC REPAIR OF MISSING SURFACES OF LOD2 BUILDING MODELS

H. Rashidan1, A. Abdul Rahman1, I. A. Musliman1, and G. Buyuksalih2 H. Rashidan et al.
  • 13D GIS Research Lab, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
  • 2Istanbul, Turkey

Keywords: 3D Building Models, Automatic Repair Technique, Geometric Errors

Abstract. 3D city models are increasingly being used to represent the complexity of today’s urban areas, as they aid in understanding how different aspects of a city can function. For instance, several municipalities and governmental organisations have constructed their 3D city models for various purposes. These 3D models, which are normally complex and contain semantics information, have typically been used for visualisation and visual analysis purposes. However, most of the available 3D models open datasets contain many geometric and topological errors, e.g., missing surfaces (holes), self-intersecting surfaces, duplicate vertices, etc. These errors prevent the datasets from being used for advanced applications such as 3D spatial analysis which requires valid datasets and topology to calculate its volume, detect surface orientation, area calculation, etc. Therefore, certain repairs must be done before taking these models into actual applications, and hole-filling (of missing surfaces) is an important one among them. Several studies on the topic of automatic repair of the 3D model have been conducted by various researchers, with different approaches have been developed. Thus, this paper describes a triangular mesh approach for automatically repair invalid (missing surfaces) 3D building model (LOD2). The developed approach demonstrates an ability to repair missing surfaces (with holes) in a 3D building model by reconstructing geometries of the holes of the affected model. The repaired model is validated and produced a closed-two manifold model.