The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XLIII-B3-2021
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLIII-B3-2021, 477–484, 2021
https://doi.org/10.5194/isprs-archives-XLIII-B3-2021-477-2021
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLIII-B3-2021, 477–484, 2021
https://doi.org/10.5194/isprs-archives-XLIII-B3-2021-477-2021
 
28 Jun 2021
28 Jun 2021

UAV-BASED LIDAR HIGH-RESOLUTION SNOW DEPTH MAPPING IN THE SWISS ALPS: COMPARING FLAT AND STEEP FORESTS

K. Koutantou1,2, G. Mazzotti2, and P. Brunner1 K. Koutantou et al.
  • 1Centre for Hydrogeology and Geothermics (CHYN), University of Neuchatel, Neuchatel, Switzerland
  • 2WSL Swiss Federal Institute for Snow and Avalanche Research SLF, Davos, Switzerland

Keywords: UAV, Lidar, forests, snow depth mapping, 3D registration, C2C, DoD

Abstract. Snow depth mapping in Alpine forests is of high importance for hydrogeology, ecology, tourism, and natural hazards prevention. Different remote sensing approaches have been employed for the precise mapping of snow depth within forests. However, optical sensors cannot provide below-canopy information. While Airborne Laser Scanning (ALS) systems have been used successfully in this context and allow obtaining data below canopies, the costs of acquisitions are very high, not allowing frequent data acquisitions. UAV-based Lidar technology potentially can provide the critical below-canopy information at lower cost and allows for frequent acquisitions.

First attempts to employ a UAV-based Lidar system in forests have proven promising, but they are limited to flat forests and to grid-level snow depth calculations. In this study, we present UAV-based Lidar data of both flat and steep forests. Different Lidar processing workflows are analyzed and compared, and snow depth algorithms are used both at the point and the grid level. Whereas the UAV-Lidar system proved capable of mapping snow in both environments, the steep forests' data processing comes with greater challenges, especially for the 3D registration, ground classification, and point-to-point snow depth calculations.