The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XLIII-B2-2020
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLIII-B2-2020, 901–909, 2020
https://doi.org/10.5194/isprs-archives-XLIII-B2-2020-901-2020
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLIII-B2-2020, 901–909, 2020
https://doi.org/10.5194/isprs-archives-XLIII-B2-2020-901-2020

  12 Aug 2020

12 Aug 2020

DIGITAL PHOTOGRAMMETRY, TLS SURVEY AND 3D MODELLING FOR VR AND AR APPLICATIONS IN CH

A. Scianna1, G. F. Gaglio2, and M. La Guardia3 A. Scianna et al.
  • 1ICAR-CNR (High Performance Computing and Networking Institute - National Research Council of Italy) at GISLab c/o D’Arch, Polytechnic School of University of Palermo, Viale delle Scienze, Edificio 8, 90128 Palermo, Italy
  • 2ICAR-CNR (High Performance Computing and Networking Institute - National Research Council of Italy), at GISLab, Via Ugo La Malfa 153, Edificio 8, 90146 Palermo, Italy
  • 3Department of Engineering, Polytechnic School of University of Palermo, Viale delle Scienze, Edificio 10, 90128 Palermo, Italy

Keywords: AR, VR, TLS, UAV, Photogrammetry, 3D modelling

Abstract. The world of valorization of Cultural Heritage is even more focused on the virtual representation and reconstructions of digital 3D models of monuments and archaeological sites. In this scenario the quality and the performances offered by the virtual reality (VR) and augmented reality (AR) navigation take primary importance, improving the accessibility of cultural sites where the real access is not allowed for natural conditions or human possibilities. The creation of a virtual environment useful for these purposes requires a specific workflow to follow, combining different strategies in the fields of survey, 3D modelling and virtual navigation. In this work a specific case of study has been analyzed as a practical example, the church of ‘San Giorgio dei Genovesi’, settled in the Historic Centre of Palermo (Italy). The acquisition of geometric information has been obtained with the integration of Terrestrial Laser Scanner (TLS) technologies and the photogrammetric reconstruction from mini Unmanned Aerial Vehicle (UAV) equipment. The obtained point cloud has been georeferred considering a network of Ground Control Points (GCP) acquired by a Global Navigation Satellite System (GNSS) receiver. The final point cloud has been processed and properly simplified through 3D modelling procedures, to obtain a realistic and light 3D model reconstruction. The model has hence employed into a VR WEB navigation system and will be used for AR outdoor application in the future, allowing to obtain different solutions for empowering the accessibility of the cultural good. The strategy of 3D CH model reconstruction, followed in this work, could be considered a reference methodology for the development of VR gaming applications finalized to CH valorization and AR applications, applied to museums or touristic paths in historical centres.