The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XLIII-B2-2020
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLIII-B2-2020, 119–125, 2020
https://doi.org/10.5194/isprs-archives-XLIII-B2-2020-119-2020
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLIII-B2-2020, 119–125, 2020
https://doi.org/10.5194/isprs-archives-XLIII-B2-2020-119-2020

  12 Aug 2020

12 Aug 2020

IMPACT OF FLIGHT ALTITUDE ON UNMANNED AERIAL PHOTOGRAMMETRIC SURVEY OF THE SNOW HEIGHT ON MOUNT LEBANON

C. Abou Chakra1,2, J. Somma1, S. Gascoin3, P. Fanise3, and L. Drapeau3 C. Abou Chakra et al.
  • 1Laboratoire de Télédétection, Centre de Recherche en Environnement-Espace Méditerranée Orientale, Université Saint-Joseph, Beirut, Lebanon
  • 2Arab Union of Surveyors, Beirut, Lebanon
  • 3CESBIO, Université de Toulouse, CNES/CNRS/INRA/IRD/UPS, Toulouse, France

Keywords: UAV, Snow height, Agisoft, Structure from Motion, Photogrammetry, Karst

Abstract. In Lebanon, the seasonal snowpack is poorly monitored despite its importance for water resource supply. The snow accumulates on Mount Lebanon in karstic depressions named “sinkholes.” It is important to monitor the evolution of the snow height inside those “sinkholes”, because of their key role as “containers” for seasonal snow. UAV photogrammetry is a major technological breakthrough which allows an accurate monitoring of the snow height. Because the impact of flight parameters on snow height retrievals is not well documented yet, this research aims to evaluate the impact of UAV flight altitude on the resolution and accuracy of the resulting orthomosaic and DSM. The flight missions were done using the Phantom DJI which generated five DSMs. These are validated using total station measurements.

The results indicate that the snow DSMs can be retrieved by adopting a resolution of 8 to 84 cm, a point density between 1.43 and 153 points/sqm and a RMSE of 13 to 41 cm. The testing was done using an elevation varying between 50 and 500 m. The results will be compared to total station observations. These results allow the user to choose the suitable flight altitude for required resolution and points density. We suggest that a flight altitude of 100 m is sufficient for the survey of the snow cover elevation.