The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XLIII-B1-2022
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLIII-B1-2022, 399–406, 2022
https://doi.org/10.5194/isprs-archives-XLIII-B1-2022-399-2022
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLIII-B1-2022, 399–406, 2022
https://doi.org/10.5194/isprs-archives-XLIII-B1-2022-399-2022
 
30 May 2022
30 May 2022

SFM-BASED 3D RECONSTRUCTION OF HERITAGE ASSETS USING UAV THERMAL IMAGES

G. Patrucco1, F. Giulio Tonolo1, G. Sammartano1,2, and A. Spanò1,2 G. Patrucco et al.
  • 1Department of Architecture and Design (DAD) – Politecnico di Torino, Viale Mattioli 39, 10125 Torino, Italy
  • 2Polito FULL | the Future Urban Legacy Lab, OGR Tech. Corso Castelfidardo, 22, 10128 Torino, Italy

Keywords: Thermal images, UAV photogrammetry, Data Fusion, Non-invasive diagnostic, Cultural Heritage monitoring

Abstract. In the last few years, notable progress has been made in the field of non-invasive diagnostic for the monitoring of heritage assets. In particular, multispectral imagery (more specifically thermal images will be addressed in this manuscript) allows investigations in the non-visible range of the electro-magnetic spectrum to be effectively carried out. Many researchers are currently exploring the possibilities related to the use of this kind of images in photogrammetric SfM-based processes to produce 2D and 3D value-added metric products, characterised by high level of detail and spatial resolution, including the information connected to the non-visible data. A data fusion-based strategy enables co-registering visible and thermal images in order to exploit the higher spatial resolution of the traditional true colour images. However, there are still many shortcomings to be addressed to properly and efficiently orient TIR (Thermal Infrared) images, connected (among other factors) to their low spatial resolution, or to the low contrast between adjacent materials characterised by similar emissivity. This paper proposes two different workflows to process thermal images using SfM algorithms, applied to three different case studies, each characterised by different characteristics and features (size, morphology, emissivity of the materials, etc.). The different pipelines are described and the obtained results are critically evaluated considering the metric accuracy, 3D geometric reconstruction and noise, completeness of the data and overall quality of the generated dense point cloud. Additionally, the effectiveness of the adopted strategies in connection with the peculiar features of the analysed case studies is also considered.