The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XLIII-B1-2020
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLIII-B1-2020, 291–298, 2020
https://doi.org/10.5194/isprs-archives-XLIII-B1-2020-291-2020
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLIII-B1-2020, 291–298, 2020
https://doi.org/10.5194/isprs-archives-XLIII-B1-2020-291-2020

  06 Aug 2020

06 Aug 2020

REGISTRATION OF MMS LiDAR POINTS AND PANORAMIC IMAGE SEQUENCE USING RELATIVE ORIENTATION MODEL

N. Zhu1, B. Yang1, and Y. Jia2 N. Zhu et al.
  • 1State Key Laboratory of Information Engineering in Surveying, Mapping and Remote Sensing, Wuhan University, Wuhan 430079, China
  • 2School of Remote Sensing and Information Engineering, Wuhan University, Wuhan 430079, China

Keywords: MMS LiDAR points, Panoramic Image Sequence, Registration, Relative Orientation Model (ROM), SURF

Abstract. We propose using the relative orientation model (ROM) of panoramic to register the MMS LiDAR points and panoramic image sequence, which has the wide applicability. The feature points, extracted and matched from panoramic image pairs, are used to solve the relative position and attitude parameters in the ROM, then, combining the absolute position and attitude parameters of the initial panoramic image, the MMS LiDAR points and panoramic image sequence are registered. First, we propose the position/attitude ROM (PA-ROM) and attitude ROM (A-ROM) of panoramic images respectively, which are apply to the position/attitude parameters both unknown and only the attitude parameters unknown. Second, we automatically extract and match feature points from panoramic image pairs using the SURF algorithm, as these mismatching points will affect the registration accuracy, the RANSAC algorithm and ROM were used to choose the best matching points automatically. Finally, we select the feature points manually from MMS LiDAR points and panoramic image sequence as the checkpoints, and then compare the registration accuracy of continuous/discontinuous panoramic image pairs. The results show that MMS LiDAR points and panoramic image sequence are registered accurately based on ROM (7.36 and 3.75 pixels in dataset I and II), what's more, our registration method just tackle the image pairs (uninvolved LiDAR points), so it is suitable for more road scenes.