The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XLIII-B1-2020
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLIII-B1-2020, 285–290, 2020
https://doi.org/10.5194/isprs-archives-XLIII-B1-2020-285-2020
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLIII-B1-2020, 285–290, 2020
https://doi.org/10.5194/isprs-archives-XLIII-B1-2020-285-2020

  06 Aug 2020

06 Aug 2020

THE ASSESSMENT OF CURVED CENTERLINE GENERATION IN HDMAPS BASED ON POINT CLOUDS

J. C. Zeng and K. W. Chiang J. C. Zeng and K. W. Chiang
  • Dept. of Geomatics, National Cheng Kung University, No.1, Daxue Road, East District, Tainan, Taiwan

Keywords: point cloud, HD Maps, MLS, autonomous vehicle, road edge, lane line, centerline

Abstract. Over the decades, autonomous driving technology has attracted a lot of attention and is under rapid development. However, it still suffers from inadequate accuracy in a certain area, such as the urban area, Global Navigation Satellite System (GNSS) hostile area, due to the multipath interference or Non-Line-of-Sight (NLOS) reception. In order to realize fully autonomous applications, High Definition Maps (HD Maps) become extra assisted information for autonomous vehicles to improve road safety in recent years. Compared with the conventional navigation maps, the accuracy requirement in HD Maps, which is 20 cm in the horizontal direction and 30 cm in 3D space, is considerably higher than the conventional one. Additionally, HD Maps consist of rich and high accurate road traffic information and road elements. For the requirement of high accuracy, conducting a Mobile Laser Scanning (MLS) system is an appropriate method to collect the geospatial data accurately and efficiently. Nowadays, digital vector maps are constructed by digitalizing manually on the collected data. However, the manual process spends a lot of manpower and is not efficient and practical for a large field. Therefore, this paper proposes to automatically construct the crucial road elements, such as road edge, lane line, and centerline, to generate the HD Maps based on point clouds collected by the MMS from the surveying company. The RMSEs in the horizontal direction of the road edge, lane line, and centerline are all lower than 30 cm in 3D space.