Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-5/W1, 153-160, 2017
https://doi.org/10.5194/isprs-archives-XLII-5-W1-153-2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 3.0 License.
 
15 May 2017
INTEGRATION OF INFRARED THERMOGRAPHY AND PHOTOGRAMMETRIC SURVEYING OF BUILT LANDSCAPE
M. Scaioni1, E. Rosina1, A. L’Erario1, and L. Dìaz-Vilariño2,3 1Dept. Architecture, Built Environment and Construction Engineering, Politecnico di Milano, 20137 Milano, Italy
2Area of Cartographic Engineering, Photogrammetry and Geodesy, Applied Geotechnology Research Group, University of Vigo, 36310 Vigo, Pontevedra, Spain
3TU Delft - Faculty of Architecture, OTB, section GIS Technology, Delft, the Netherlands
Keywords: Infrared Thermography, Structure-from-Motion, Close-range, Photogrammetry, Cultural Heritage, Data integration Abstract. The thermal analysis of buildings represents a key-step for reduction of energy consumption, also in the case of Cultural Heritage. Here the complexity of the constructions and the adopted materials might require special analysis and tailored solutions. Infrared Thermography (IRT) is an important non-destructive investigation technique that may aid in the thermal analysis of buildings. The paper reports the application of IRT on a listed building, belonging to the Cultural Heritage and to a residential one, as a demonstration that IRT is a suitable and convenient tool for analysing the existing buildings. The purposes of the analysis are the assessment of the damages and energy efficiency of the building envelope. Since in many cases the complex geometry of historic constructions may involve the thermal analysis, the integration of IRT and accurate 3D models were developed during the latest years. Here authors propose a solution based on the up-to-date photogrammetric solutions for purely image-based 3D modelling, including automatic image orientation/sensor calibration using Structure-from-Motion and dense matching. Thus, an almost fully automatic pipeline for the generation of accurate 3D models showing the temperatures on a building skin in a realistic manner is described, where the only manual task is given by the measurement of a few common points for co-registration of RGB and IR photogrammetric projects.
Conference paper (PDF, 1556 KB)


Citation: Scaioni, M., Rosina, E., L’Erario, A., and Dìaz-Vilariño, L.: INTEGRATION OF INFRARED THERMOGRAPHY AND PHOTOGRAMMETRIC SURVEYING OF BUILT LANDSCAPE, Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-5/W1, 153-160, https://doi.org/10.5194/isprs-archives-XLII-5-W1-153-2017, 2017.

BibTeX EndNote Reference Manager XML