VULNERABILITY MAPPING AND ANALYSIS: AN IMPLEMENTATION IN GEOHAZARD AREAS IN SABAH
- 1Geomapping Technology Sdn Bhd/Society for Engineering Geology and Rock Mechanics, Malaysia
- 2Minerals and Geoscience Department (Technical Services), Malaysia
- 3Faculty of Built Environment and Surveying, Universiti Teknologi Malaysia, Johor, Malaysia
Keywords: Landslide vulnerability, Geospatial, Landslide risk
Abstract. Vulnerability identifies the element-at-risk as well as the evaluation of their relationships with the hazard. The relationships relate the landslide potential damages over a specific element-at-risk. Vulnerability can be defined as the degree of loss to a given element-at-risk or set of elements at risk resulting from the occurrence of a natural phenomenon of a given magnitude and expressed on a scale from 0 (no damage) to 1 (total damage). In this study, the landslide vulnerability mapping and analysis were made on two element-at-risks namely buildings and roads. Based on field observations, building and road construction materials have been classified into 22 and 5 construction materials respectively. The field visits were made on specific areas based on candidate buildings and roads as chosen during the landslide exposure analysis and mapping. The vulnerability values for these element-at-risks were expressed using expert opinion. Four experts have been interviewed with separate sessions. The experts were also supplied with local information on the landslides occurrences and photos of element-at-risk in Kundasang and Kota Kinabalu. The vulnerability matrices were combined based on the weighted average approach, in which higher weight was assigned to panel with local expert (landslides and damage assessment), wide experience in landslide vulnerability analysis, hazard and risk mapping. Finally, the vulnerability maps were produced for Kundasang and Kota Kinabalu with spatial resolution of 25 cm. These maps were used for the next step i.e. landslide risk mapping and analysis.