Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-4/W1, 217-224, 2016
https://doi.org/10.5194/isprs-archives-XLII-4-W1-217-2016
© Author(s) 2016. This work is distributed under
the Creative Commons Attribution 3.0 License.
 
29 Sep 2016
ESTIMATION OF AERODYNAMIC ROUGHNESS AND ZERO PLANE DISPLACEMENT USING MEDIUM DENSITY OF AIRBORNE LIDAR DATA
M. R. Mohd Salleh1, M. Z. Abdul Rahman1, M. A. Abu Bakar1, A. W. Rasib1, and H. Omar2 1TropicalMap Research Group, Department of Geoinformation, Faculty of Geoinformation and Real Estate, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
2Forest Research Institute Malaysia (FRIM), 52109 Kepong, Selangor Darul Ehsan, Malaysia
Keywords: Airborne LiDAR, Aerodynamic Roughness Length, Zero Plane Displacement, Forest Abstract. This paper presents a framework to estimate aerodynamic roughness over specific height (zo/H) and zero plane displacement (d/H) over various landscapes in Kelantan State using airborne LiDAR data. The study begins with the filtering of airborne LiDAR, which produced ground and non-ground points. The ground points were used to generate digital terrain model (DTM) while the non-ground points were used for digital surface model (DSM) generation. Canopy height model (CHM) was generated by subtracting DTM from DSM. Individual trees in the study area were delineated by applying the Inverse Watershed segmentation method on the CHM. Forest structural parameters including tree height, height to crown base (HCB) and diameter at breast height (DBH) were estimated using existing allometric equations. The airborne LiDAR data was divided into smaller areas, which correspond to the size of the zo/H and d/H maps i.e. 50 m and 100 m. For each area individual tree were reconstructed based on the tree properties, which accounts overlapping between crowns and trunks. The individual tree models were used to estimate individual tree frontal area and the total frontal area over a specific ground surface. Finally, three roughness models were used to estimate zo/H and d/H for different wind directions, which were assumed from North/South and East/West directions. The results were shows good agreements with previous studies that based on the wind tunnel experiments.
Conference paper (PDF, 1388 KB)


Citation: Mohd Salleh, M. R., Abdul Rahman, M. Z., Abu Bakar, M. A., Rasib, A. W., and Omar, H.: ESTIMATION OF AERODYNAMIC ROUGHNESS AND ZERO PLANE DISPLACEMENT USING MEDIUM DENSITY OF AIRBORNE LIDAR DATA, Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-4/W1, 217-224, https://doi.org/10.5194/isprs-archives-XLII-4-W1-217-2016, 2016.

BibTeX EndNote Reference Manager XML