The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Publications Copernicus
Articles | Volume XLII-3
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-3, 2473–2477, 2018
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-3, 2473–2477, 2018

  02 May 2018

02 May 2018


C. Zuo1,2, X. Xiao1,2, Q. Hou1,2, and B. Li1,2 C. Zuo et al.
  • 1Beijing Institute of Mapping and Surveying, Beijing, China
  • 2Beijing Key Laboratory of Urban Spatial Information Engineering, Beijng, China

Keywords: WorldView-3, RPC Block Adjustment Model, DSM, Image Matching

Abstract. WorldView-3, as a high-resolution commercial earth observation satellite, which is launched by Digital Global, provides panchromatic imagery of 0.31 m resolution. The positioning accuracy is less than 3.5 meter CE90 without ground control, which can use for large scale topographic mapping. This paper presented the block adjustment for WorldView-3 based on RPC model and achieved the accuracy of 1 : 2000 scale topographic mapping with few control points. On the base of stereo orientation result, this paper applied two kinds of image matching algorithm for DSM extraction: LQM and SGM. Finally, this paper compared the accuracy of the point cloud generated by the two image matching methods with the reference data which was acquired by an airborne laser scanner.
The results showed that the RPC adjustment model of WorldView-3 image with small number of GCPs could satisfy the requirement of Chinese Surveying and Mapping regulations for 1 : 2000 scale topographic maps. And the point cloud result obtained through WorldView-3 stereo image matching had higher elevation accuracy, the RMS error of elevation for bare ground area is 0.45 m, while for buildings the accuracy can almost reach 1 meter.