LIDAR BATHYMETRIC EVALUATION BASED ON SCATTERING CLASSIFICATION ALGORITHM
- 1Guangxi Key Laboratory of Spatial Information and Geomatics, Guilin University of Technology, No. 12 Jian’gan Road, Guilin, Guangxi 541004, China
- 2Department of Mechanical and Control Engineering, Guilin University of Technology, No. 12 Jian’gan Road, Guilin, Guangxi 541004, China
Keywords: Airborne lidar, Scattering classification algorithm, Bathymetry capability, Transmissivity, diffuse attenuation coefficient
Abstract. The evaluation of the bathymetric capability of traditional airborne lidar system is mostly based on the formula of bathymetric capability by evaluating the diffuse attenuation coefficient (Kd). This method is derived form the assumption that the reflectance of sediment is fixed. In this study ,however,the reflectance of sediment is not fixed. Therefore, this study improves the ability of bathymetric formula, and proposes a particle scattering classification algorithm to obtain the transmissivity value. The algorithm filters the scattering modes of particles by scattering discrimination factor (q), and obtains the transmissivity values by using the scattering intensity formulas. Experiments show that, when the transmissivity is in the range of 0–1 and the average values of Kd(532 nm) are 0.1150 m−1, 0.0894 m−1 and 0.0903 m−1 in January, June and October respectively, accordingly, the bathymetric capabilities are 0–44 m, 0–61.5 m and 0–52.5 m, respectively. Compared with the original bathymetric method, these results show that the maximum bathymetric value has measured by the improved bathymetric capability formula and scattering classification algorithm has decreased under the influence of the change of sediment reflectance, and the result is more consistent with the actual situation and more accurate.