Volume XLII-2
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-2, 1145-1148, 2018
https://doi.org/10.5194/isprs-archives-XLII-2-1145-2018
© Author(s) 2018. This work is distributed under
the Creative Commons Attribution 4.0 License.
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-2, 1145-1148, 2018
https://doi.org/10.5194/isprs-archives-XLII-2-1145-2018
© Author(s) 2018. This work is distributed under
the Creative Commons Attribution 4.0 License.

  30 May 2018

30 May 2018

OPEN PIT MINE 3D MAPPING BY TLS AND DIGITAL PHOTOGRAMMETRY: 3D MODEL UPDATE THANKS TO A SLAM BASED APPROACH

G. Vassena and A. Clerici G. Vassena and A. Clerici
  • Department DICATAM, University of Brescia, 25123 Brescia, Italy

Keywords: TLS, digital photogrammetry, open pit mine, SLAM, mapping, automatic localization

Abstract. The state of the art of 3D surveying technologies, if correctly applied, allows to obtain 3D coloured models of large open pit mines using different technologies as terrestrial laser scanner (TLS), with images, combined with UAV based digital photogrammetry. GNSS and/or total station are also currently used to geo reference the model. The University of Brescia has been realised a project to map in 3D an open pit mine located in Botticino, a famous location of marble extraction close to Brescia in North Italy. Terrestrial Laser Scanner 3D point clouds combined with RGB images and digital photogrammetry from UAV have been used to map a large part of the cave. By rigorous and well know procedures a 3D point cloud and mesh model have been obtained using an easy and rigorous approach. After the description of the combined mapping process, the paper describes the innovative process proposed for the daily/weekly update of the model itself. To realize this task a SLAM technology approach is described, using an innovative approach based on an innovative instrument capable to run an automatic localization process and real time on the field change detection analysis.