Volume XLII-2/W7
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-2/W7, 875-879, 2017
https://doi.org/10.5194/isprs-archives-XLII-2-W7-875-2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 4.0 License.
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-2/W7, 875-879, 2017
https://doi.org/10.5194/isprs-archives-XLII-2-W7-875-2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 4.0 License.

  13 Sep 2017

13 Sep 2017

FAST REGISTRATION OF TERRESTRIAL LIDAR POINT CLOUD AND SEQUENCE IMAGES

J. Shao1, W. Zhang1, Y. Zhu2, and A. Shen1 J. Shao et al.
  • 1State Key Laboratory of Remote Sensing Science, Institute of Remote Sensing Science and Engineering, Faculty of Geographical Science, Beijing Normal University, Beijing 100875, China
  • 2College of Urban and Environment, Hubei Normal University, Huangshi 435002, Hubei, China

Keywords: Terrestrial LiDAR, Point cloud, Sequence Images, 2D-3D, Registration

Abstract. Image has rich color information, and it can help to promote recognition and classification of point cloud. The registration is an important step in the application of image and point cloud. In order to give the rich texture and color information for LiDAR point cloud, the paper researched a fast registration method of point cloud and sequence images based on the ground-based LiDAR system. First, calculating transformation matrix of one of sequence images based on 2D image and LiDAR point cloud; second, using the relationships of position and attitude information among multi-angle sequence images to calculate all transformation matrixes in the horizontal direction; last, completing the registration of point cloud and sequence images based on the collinear condition of image point, projective center and LiDAR point. The experimental results show that the method is simple and fast, and the stitching error between adjacent images is litter; meanwhile, the overall registration accuracy is high, and the method can be used in engineering application.