ASSESSMENT OF A PORTABLE TOF CAMERA AND COMPARISON WITH SMARTPHONE STEREO VISION
- Interdepartmental Research Center of Geomatics (CIRGEO), University of Padova, Viale dell’Università 16, Legnaro (PD) 35020, Italy
Keywords: TOF camera, Depth sensor, Stereo vision, Smartphone
Abstract. Nowadays time-of-flight (ToF) cameras and multiple RGB cameras are being embedded in an increasing number of high-end smartphones: despite their integration in mobile devices is mostly motivated by photographic applications, their availability can be exploited to enable 3D reconstructions directly on smartphones. Furthermore, even when a ToF camera is not embedded in a smartphone, low cost solutions are available on the market in order to easily provide standard mobile devices with a lightweight and extremely portable ToF camera. This work deals with the assessment of a low cost ToF camera, namely Pico Zense DCAM710, which perfectly fits with the above description. According to the results obtained in the considered tests, the ranging error (precision) of the DCAM710 camera increases linearly approximately up to the nominal maximum range in the considered working mode, up to approximately 1 cm. Despite the device allows to acquire measurements also at larger ranges, the measurement quality significantly worsen. After assessing the main characteristics of such ToF camera, this paper aims at comparing its 3D reconstruction ability with that of a smartphone stereo vision system. In particular, the comparison of a 3D reconstruction obtained with stereo vision from images acquired with an LG G6 shows that the stereo reconstruction leads to a much larger point cloud. However, points generated by the ToF camera are more homogeneously distributed, and they seem to slightly better describe the real geometry of the reconstructed object. The combination of such two technologies, which will be investigated in our future work, can potentially lead to a denser cloud with respect to the ToF camera, while preserving a reasonable accuracy.