Volume XLII-2/W15
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-2/W15, 679–685, 2019
https://doi.org/10.5194/isprs-archives-XLII-2-W15-679-2019
© Author(s) 2019. This work is distributed under
the Creative Commons Attribution 4.0 License.
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-2/W15, 679–685, 2019
https://doi.org/10.5194/isprs-archives-XLII-2-W15-679-2019
© Author(s) 2019. This work is distributed under
the Creative Commons Attribution 4.0 License.

  23 Aug 2019

23 Aug 2019

AN AUTOMATIC EXTRACTION METHOD FOR THE PARAMETERS OF MULTI-LOD BIM MODELS FOR TYPICAL COMPONENTS OF WOODEN ARCHITECTURAL HERITAGE

H. Liu1,3,4, M. Hou1,3,4, A. Li1,2,3, and L. Xie2 H. Liu et al.
  • 1Beijing Advanced Innovation Center for Future Urban Design, Beijing University of Civil Engineering and Architecture, Beijing 100044, China
  • 2School of Civil and Transportation Engineering, Beijing University of Civil Engineering and Architecture, Beijing 100044, China
  • 3School of Geomatics and Urban Spatial Informatics, Beijing University of Civil Engineering and Architecture, Beijing 100044, China
  • 4Beijing Key Laboratory for Architectural Heritage Fine Reconstruction & Health Monitoring, Beijing 100044, China

Keywords: Wooden architectural, Architectural heritage protection, BIM model, Automatic extraction method, Point cloud processing

Abstract. A demand-oriented Building Information Model (BIM) model built using high-fidelity point cloud data can better protect architectural heritage. The multi-level detail (mutli-LoD) parametric model emphasizes the different protection requirements of typical components and the automatic extraction of corresponding parameters of high-fidelity point clouds, which are two related key issues. Taking the typical Chinese wooden architectural heritage as an example, according to different requirements, the multi-LoD principle of typical components is proposed. On this basis, the automatic extraction method of the above parameters is developed, and the key parameters of the method are recommended. In order to solve the above problems, taking the three typical Dou-Gong used in Liao Dynasty and Song Dynasty, including Zhutou Puzuo, Bujian Puzuo and Zhuanjiao Puzuo, as an example, briefly introduced the standardization characteristics of the typical components of the "Yingzao Fashi". Subsequently, the corresponding multiple LoD principles are recommended according to different requirements. Based on this and high-fidelity point cloud data, an automatic extraction method for multi-LoD BIM model parameters for typical components of wooden architectural heritage is proposed.