DISTANCE-TRAINING FOR IMAGE-BASED 3D MODELLING OF ARCHEOLOGICAL SITES IN REMOTE REGIONS
- 1Vasil Levski National Military University, Veliko Tarnovo, Bulgaria
- 2Dept. of Civil and Environmental Engineering (DICA), Politecnico di Milano, Piazza Leonardo da Vinci 32, Milan, Italy
- 3Node-Office Tehran, Iran
- 4Dept. of Architecture, Built environment and Construction engineering (DABC), Politecnico di Milano, Via Ponzio 31, Milan, Italy
Keywords: Archeology, Photogrammetry, Remote Areas, Structure-from-Motion, Training
Abstract. The impressive success of Structure-from-Motion Photogrammetry (SfM) has spread out the application of image-based 3D reconstruction to a larger community. In the field of Archeological Heritage documentation, this has opened the possibility of training local people to accomplish photogrammetric data acquisition in those remote regions where the organization of 3D surveying missions from outside may be difficult, costly or even impossible. On one side, SfM along with low-cost cameras makes this solution viable. On the other, the achievement of high-quality photogrammetric outputs requires a correct image acquisition stage, being this the only stage that necessarily has to be accomplished locally. This paper starts from the analysis of the well-know “3×3 Rules” proposed in 1994 when photogrammetry with amateur camera was the state-of-the art approach and revises those guidelines to adapt to SfM. Three aspects of data acquisition are considered: geometry (control information, photogrammetric network), imaging (camera/lens selection and setup, illumination), and organization. These guidelines are compared to a real case study focused on Ziggurat Chogha Zanbil (Iran), where four blocks from ground stations and drone were collected with the purpose of 3D modelling.