The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XLII-2/W10
https://doi.org/10.5194/isprs-archives-XLII-2-W10-181-2019
https://doi.org/10.5194/isprs-archives-XLII-2-W10-181-2019
17 Apr 2019
 | 17 Apr 2019

ITERATIVE REFINEMENT FOR UNDERWATER 3D RECONSTRUCTION: APPLICATION TO DISPOSED UNDERWATER MUNITIONS IN THE BALTIC SEA

Y. Song, K. Köser, T. Kwasnitschka, and R. Koch

Keywords: Underwater Photogrammetry, 3D Reconstruction, Refraction Correction, Underwater Image Restoration, Underwater Munitions

Abstract. With the rapid development and availability of underwater imaging technologies, underwater visual recording is widely used for a variety of tasks. However, quantitative imaging and photogrammetry in the underwater case has a lot of challenges (strong geometry distortion and radiometry issues) that limit the traditional photogrammetric workflow in underwater applications. This paper presents an iterative refinement approach to cope with refraction induced distortion while building on top of a standard photogrammetry pipeline. The approach uses approximate geometry to compensate for water refraction effects in images and then brings the new images into the next iteration of 3D reconstruction until the update of resulting depth maps becomes neglectable. Afterwards, the corrected depth map can also be used to compensate the attenuation effect in order to get a more realistic color for the 3D model. To verify the geometry improvement of the proposed approach, a set of images with air-water refraction effect were rendered from a ground truth model and the iterative refinement approach was applied to improve the 3D reconstruction. At the end, this paper also shows its application results for 3D reconstruction of a dump site for underwater munition in the Baltic Sea for which a visual monitoring approach is desired.