Volume XLII-1
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-1, 189-194, 2018
https://doi.org/10.5194/isprs-archives-XLII-1-189-2018
© Author(s) 2018. This work is distributed under
the Creative Commons Attribution 4.0 License.
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-1, 189-194, 2018
https://doi.org/10.5194/isprs-archives-XLII-1-189-2018
© Author(s) 2018. This work is distributed under
the Creative Commons Attribution 4.0 License.

  26 Sep 2018

26 Sep 2018

FUSION OF 3D POINT CLOUDS WITH TIR IMAGES FOR INDOOR SCENE RECONSTRUCTION

L. Hoegner1, T. Abmayr2, D. Tosic1, S. Turzer2, and U. Stilla1 L. Hoegner et al.
  • 1Photogrammetry and Remote Sensing - Technical University of Munich, Germany
  • 2University of Applied Sciences Munich, Department of Geoinformation, Germany

Keywords: photogrammetric point cloud, terrestrial laserscanning, thermal images, indoor, 3D reconstruction

Abstract. Obtaining accurate 3D descriptions in the thermal infrared (TIR) is a quite challenging task due to the low geometric resolutions of TIR cameras and the low number of strong features in TIR images. Combining the radiometric information of the thermal infrared with 3D data from another sensor is able to overcome most of the limitations in the 3D geometric accuracy. In case of dynamic scenes with moving objects or a moving sensor system, a combination with RGB cameras and profile laserscanners is suitable. As a laserscanner is an active sensor in the visible red or near infrared (NIR) and the thermal infrared camera captures the radiation emitted by the objects in the observed scene, the combination of these two sensors for close range applications are independent from external illumination or textures in the scene. This contribution focusses on the fusion of point clouds from terrestrial laserscanners and RGB cameras with images from thermal infrared mounted together on a robot for indoor 3D reconstruction. The system is geometrical calibrated including the lever arm between the different sensors. As the field of view is different for the sensors, the different sensors record the same scene points not exactly at the same time. Thus, the 3D scene points of the laserscanner and the photogrammetric point cloud from the RGB camera have to be synchronized before point cloud fusion and adding the thermal channel to the 3D points.