The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XLII-1/W1
https://doi.org/10.5194/isprs-archives-XLII-1-W1-393-2017
https://doi.org/10.5194/isprs-archives-XLII-1-W1-393-2017
31 May 2017
 | 31 May 2017

AUTOMATIC ROOFTOP EXTRACTION IN STEREO IMAGERY USING DISTANCE AND BUILDING SHAPE REGULARIZED LEVEL SET EVOLUTION

J. Tian, T. Krauß, and P. d’Angelo

Keywords: Rooftop extraction, Level set, DSM, DTM

Abstract. Automatic rooftop extraction is one of the most challenging problems in remote sensing image analysis. Classical 2D image processing techniques are expensive due to the high amount of features required to locate buildings. This problem can be avoided when 3D information is available. In this paper, we show how to fuse the spectral and height information of stereo imagery to achieve an efficient and robust rooftop extraction. In the first step, the digital terrain model (DTM) and in turn the normalized digital surface model (nDSM) is generated by using a newly step-edge approach. In the second step, the initial building locations and rooftop boundaries are derived by removing the low-level pixels and high-level pixels with higher probability to be trees and shadows. This boundary is then served as the initial level set function, which is further refined to fit the best possible boundaries through distance regularized level-set curve evolution. During the fitting procedure, the edge-based active contour model is adopted and implemented by using the edges indicators extracted from panchromatic image. The performance of the proposed approach is tested by using the WorldView-2 satellite data captured over Munich.