Volume XLII-1/W1
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-1/W1, 175-180, 2017
https://doi.org/10.5194/isprs-archives-XLII-1-W1-175-2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 3.0 License.
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-1/W1, 175-180, 2017
https://doi.org/10.5194/isprs-archives-XLII-1-W1-175-2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 3.0 License.

  31 May 2017

31 May 2017

GEOREFERENCING IN GNSS-CHALLENGED ENVIRONMENT: INTEGRATING UWB AND IMU TECHNOLOGIES

C. K. Toth1, Z. Koppanyi1, V. Navratil1,2, and D. Grejner-Brzezinska1 C. K. Toth et al.
  • 1SPIN Lab, Dept. of Civil, Environmental & Geodetic Eng., The Ohio State University, 2036 Neil Ave, Columbus, OH, USA
  • 2Czech Technical University in Prague, Dept. of Radio Engineering, Technicka 2, 166 27, Praha 6, Czech Republic

Keywords: Ultra-wide band, GNSS-denied positioning, UXO mapping

Abstract. Acquiring geospatial data in GNSS compromised environments remains a problem in mapping and positioning in general. Urban canyons, heavily vegetated areas, indoor environments represent different levels of GNSS signal availability from weak to no signal reception. Even outdoors, with multiple GNSS systems, with an ever-increasing number of satellites, there are many situations with limited or no access to GNSS signals. Independent navigation sensors, such as IMU can provide high-data rate information but their initial accuracy degrades quickly, as the measurement data drift over time unless positioning fixes are provided from another source. At The Ohio State University’s Satellite Positioning and Inertial Navigation (SPIN) Laboratory, as one feasible solution, Ultra- Wideband (UWB) radio units are used to aid positioning and navigating in GNSS compromised environments, including indoor and outdoor scenarios. Here we report about experiences obtained with georeferencing a pushcart based sensor system under canopied areas. The positioning system is based on UWB and IMU sensor integration, and provides sensor platform orientation for an electromagnetic inference (EMI) sensor. Performance evaluation results are provided for various test scenarios, confirming acceptable results for applications where high accuracy is not required.