The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XLI-B5
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLI-B5, 799–804, 2016
https://doi.org/10.5194/isprs-archives-XLI-B5-799-2016
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLI-B5, 799–804, 2016
https://doi.org/10.5194/isprs-archives-XLI-B5-799-2016

  16 Jun 2016

16 Jun 2016

FACETS : A CLOUDCOMPARE PLUGIN TO EXTRACT GEOLOGICAL PLANES FROM UNSTRUCTURED 3D POINT CLOUDS

T.J. B. Dewez1, D. Girardeau-Montaut2, C. Allanic1, and J. Rohmer1 T.J. B. Dewez et al.
  • 1BRGM – French Geological Survey, 45060 Orléans-la-Source, France
  • 2DGM Conseil 38000 Grenoble – France

Keywords: geological plane, dip and strike, dip direction, virtual outcrop, unstructured 3D point clouds, CloudCompare

Abstract. Geological planar facets (stratification, fault, joint…) are key features to unravel the tectonic history of rock outcrop or appreciate the stability of a hazardous rock cliff. Measuring their spatial attitude (dip and strike) is generally performed by hand with a compass/clinometer, which is time consuming, requires some degree of censoring (i.e. refusing to measure some features judged unimportant at the time), is not always possible for fractures higher up on the outcrop and is somewhat hazardous. 3D virtual geological outcrop hold the potential to alleviate these issues. Efficiently segmenting massive 3D point clouds into individual planar facets, inside a convenient software environment was lacking. FACETS is a dedicated plugin within CloudCompare v2.6.2 (http://cloudcompare.org/ ) implemented to perform planar facet extraction, calculate their dip and dip direction (i.e. azimuth of steepest decent) and report the extracted data in interactive stereograms. Two algorithms perform the segmentation: Kd-Tree and Fast Marching. Both divide the point cloud into sub-cells, then compute elementary planar objects and aggregate them progressively according to a planeity threshold into polygons. The boundaries of the polygons are adjusted around segmented points with a tension parameter, and the facet polygons can be exported as 3D polygon shapefiles towards third party GIS software or simply as ASCII comma separated files. One of the great features of FACETS is the capability to explore planar objects but also 3D points with normals with the stereogram tool. Poles can be readily displayed, queried and manually segmented interactively. The plugin blends seamlessly into CloudCompare to leverage all its other 3D point cloud manipulation features. A demonstration of the tool is presented to illustrate these different features. While designed for geological applications, FACETS could be more widely applied to any planar objects.