RECORDING AND MODELING OF FORTRESSES AND CASTLES WITH UAS. SOME STUDY CASES IN JAEN (SOUTHERN SPAIN)
- Department of Cartographic, Geodetic and Photogrammetric Engineering. University of Jaen. 23071-Jaen, Spain
Keywords: UAS, heritage documentation, Iberian and medieval Spanish fortresses, SfM software
Abstract. The province of Jaen (Southern Spain) has one of the largest concentrations of medieval fortresses of all Europe. Moreover ancient Iberian settlements located in oppida (fortified villages) and dated at VI-IV BC also are outstanding examples of historical heritage landmarks in the region. Most of these places are being restored or under documentation analysis to prevent their progressive deterioration. These places have several geometric characteristics in common, such as isolated locations, elongated shapes, largemedium size objects (in the order of tens to few hundred of meters), architectural features with vertical development (such as masonry or rammed earth walls, towers, gates, battlements, etc) or without it (walls, buildings or paths layouts at ground level). The object size, the required level of details and accuracy (of the order of some few cm) and both vertical and horizontal features imply that present UAS techniques can be advantageously used with respect to conventional aerial and terrestrial photogrammetric techniques. Vertical stereoscopic and oblique convergent UAS photogrammetric networks combined with processing techniques based on Structure from Motion (SfM) algorithms allow detailed low cost 2D/3D products. The proper selection of the UAS, camera, image acquisition mode (stop and/or cruising), the network and the processing software will determine the quality of final products and their usefulness in metric documentation, 3D modelization or museology. The efficiency of the use of UAS has been analyzed in several selected examples in Jaen (Burgalimar and Berrueco castles, Xth and XIIIth centuries, respectively, and the Iberian Puente Tablas oppidum, Vth-IVth centuries BC).