Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLI-B5, 115-122, 2016
https://doi.org/10.5194/isprs-archives-XLI-B5-115-2016
© Author(s) 2016. This work is distributed under
the Creative Commons Attribution 3.0 License.
 
15 Jun 2016
CLOSE RANGE CALIBRATION OF LONG FOCAL LENGTH LENSES IN A CHANGING ENVIRONMENT
Stuart Robson1, Lindsay MacDonald1, Stephen Kyle1, and Mark R. Shortis2 1Department of Civil, Environmental and Geomatic Engineering, University College London, Gower Street, London WC1E 6BT, England
2School of Mathematical and Geospatial Sciences, RMIT University, GPO Box 2476, Melbourne 3001, Australia
Keywords: Camera, calibration, close range, physical parameter, correlation, temperature, wavelength Abstract. University College London is currently developing a large-scale multi-camera system for dimensional control tasks in manufacturing, including part machining, assembly and tracking, as part of the Light Controlled Factory project funded by the UK Engineering and Physical Science Research Council. In parallel, as part of the EU LUMINAR project funded by the European Association of National Metrology Institutes, refraction models of the atmosphere in factory environments are being developed with the intent of modelling and eliminating the effects of temperature and other variations. The accuracy requirements for both projects are extremely demanding, so accordingly improvements in the modelling of both camera imaging and the measurement environment are essential. At the junction of these two projects lies close range camera calibration. The accurate and reliable calibration of cameras across a realistic range of atmospheric conditions in the factory environment is vital in order to eliminate systematic errors. This paper demonstrates the challenge of experimentally isolating environmental effects at the level of a few tens of microns. Longer lines of sight promote the use and calibration of a near perfect perspective projection from a Kern 75mm lens with maximum radial distortion of the order of 0.5m. Coordination of a reference target array, representing a manufactured part, is achieved to better than 0.1mm at a standoff of 8m. More widely, results contribute to better sensor understanding, improved mathematical modelling of factory environments and more reliable coordination of targets to 0.1mm and better over large volumes.
Conference paper (PDF, 1260 KB)


Citation: Robson, S., MacDonald, L., Kyle, S., and Shortis, M. R.: CLOSE RANGE CALIBRATION OF LONG FOCAL LENGTH LENSES IN A CHANGING ENVIRONMENT, Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLI-B5, 115-122, https://doi.org/10.5194/isprs-archives-XLI-B5-115-2016, 2016.

BibTeX EndNote Reference Manager XML