The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Publications Copernicus
Download
Citation
Articles | Volume XL-8
https://doi.org/10.5194/isprsarchives-XL-8-865-2014
https://doi.org/10.5194/isprsarchives-XL-8-865-2014
28 Nov 2014
 | 28 Nov 2014

Retrieval of Surface Reflectance using SACRS2: a Scheme for Atmospheric Correction of ResourceSat-2 AWiFS data

M. R. Pandya, V. N. Pathak, D. B. Shah, and R.. P Singh

Keywords: Atmospheric Correction, AWiFS, IRS, Radiative Transfer, Resourcesat, SACRS2, Surface Reflectance

Abstract. The Indian Remote Sensing (IRS) satellite series has been providing data since 1988 through various Earth observation missions. Before using IRS data for the quantitative analysis and parameter retrieval, it must be corrected for the atmospheric effects because spectral bands of IRS sensors are contaminated by intervening atmosphere. Standard atmospheric correction model tuned for the IRS sensors was not available for deriving surface reflectance. Looking at this gap area, a study was carried out to develop a physicsbased method, called SACRS2- a Scheme for Atmospheric Correction of Resourcesat-2 (RS2) AWiFS data. SACRS2 is a computationally fast scheme developed for correcting large amount of data acquired by RS2-AWiFS sensor using a detailed radiative transfer model 6SV. The method is based on deriving a set of coefficients which depend on spectral bands of the RS2-AWiFS sensor through thousands of forward signal simulations by 6SV. Once precise coefficients of all the physical processes of atmospheric correction are determined for RS2-AWiFS spectral bands then a complete scheme was developed using these coefficients. Major inputs of the SACRS2 scheme are raw digital numbers recorded by RS2-AWiFS sensor, aerosol optical thickness at 550 nm, columnar water vapour content, ozone content and viewing-geometry. Results showed a good performance of SACRS2 with a maximum relative error in the SACRS2 simulations ranged between approximately 2 to 7 percent with respect to reference 6SV computations. A complete software package containing the SACRS2 model along with user guide and test dataset has been released on the website (www.mosdac.gov.in) for the researchers.