Volume XL-1/W2
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XL-1/W2, 407-411, 2013
https://doi.org/10.5194/isprsarchives-XL-1-W2-407-2013
© Author(s) 2013. This work is distributed under
the Creative Commons Attribution 3.0 License.
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XL-1/W2, 407-411, 2013
https://doi.org/10.5194/isprsarchives-XL-1-W2-407-2013
© Author(s) 2013. This work is distributed under
the Creative Commons Attribution 3.0 License.

  16 Aug 2013

16 Aug 2013

THE PERFORMANCE ANALYSIS OF A UAV BASED MOBILE MAPPING SYSTEM PLATFORM

M. L. Tsai1, K. W. Chiang1, C. F. Lo2, and C. H. Ch1 M. L. Tsai et al.
  • 1Dept. of Geomatics, National Cheng Kung University, Taiwan
  • 2GeoSat Informatics Technology Corporation, Taiwan

Keywords: Direct georeferencing; INS; GPS

Abstract. To facilitate applications such as environment detection or disaster monitoring, the development of rapid low cost systems for collecting near real-time spatial information is very critical. Rapid spatial information collection has become an emerging trend for remote sensing and mapping applications. This study develops a Direct Georeferencing (DG) based fixed-wing Unmanned Aerial Vehicle (UAV) photogrammetric platform where an Inertial Navigation System (INS)/Global Positioning System (GPS) integrated Positioning and Orientation System (POS) system is implemented to provide the DG capability of the platform. The performance verification indicates that the proposed platform can capture aerial images successfully. A flight test is performed to verify the positioning accuracy in DG mode without using Ground Control Points (GCP). The preliminary results illustrate that horizontal DG positioning accuracies in the x and y axes are around 5 m with 300 m flight height. The positioning accuracy in the z axis is less than 10 m. Such accuracy is good for near real-time disaster relief. The DG ready function of proposed platform guarantees mapping and positioning capability even in GCP free environments, which is very important for rapid urgent response for disaster relief. Generally speaking, the data processing time for the DG module, including POS solution generalization, interpolation, Exterior Orientation Parameters (EOP) generation, and feature point measurements, is less than one hour.