Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XXXVIII-1/C22, 289-293, 2011
© Author(s) 2011. This work is distributed
under the Creative Commons Attribution 3.0 License.
06 Sep 2012
W. Stempfhuber and M. Buchholz Beuth Hochschule für Technik Berlin, University of Applied Sciences, Department III, Luxemburger Str. 10, D-13353 Berlin, Germany
Keywords: RTK GNSS, Low-cost, Kinematic, UAVs, Machine Control, Single-Frequency-Receiver Abstract. High accuracy with real-time positioning of moving objects has been considered a standard task of engineering geodesy for 10 to 15 years. An absolute positioning accuracy of 1–3 cm is generally possible worldwide and is further used in many areas of machine guidance (machine control and guidance), and farming (precision farming) as well as for various special applications (e.g. railway trolley, mining, etc.). The cost of the measuring instruments required for the use of geodetic L1/L2 receivers with a local reference station amounts to approximately USD 30,000 to 50,000. Therefore, dual frequency RTK GNSS receivers are not used in the mass market.

Affordable GPS/GNSS modules have already reached the mass market in various areas such as mobile phones, car navigation, the leisure industry, etc. Kinematic real-time positioning applications with centimetre or decimetre levels could also evolve into a mass product. In order for this to happen, the costs for such systems must lie between USD 1,000 to 2,000. What exactly low-cost means is determined by the precise specifications of the given individual application.

Several university studies in geodesy focus on the approach of high-accuracy positioning by means of single frequency receivers for static applications [e.g. GLABSCH et. al. 2009, SCHWIEGER and GLÄSER 2005, ALKAN 2010, REALINI et. al. 2010, KORTH and HOFMANN 2011]. Although intelligent approaches have been developed that compute a trajectory in the post-processing mode [REALINI et. al., 2010], at present, there are only a very few GNSS Low-Cost Systems that enable real-time processing.

This approach to precise position determination by means of the computation of static raw data with single frequency receivers is currently being explored in a research project at the Beuth Hochschule für Technik Berlin – and is being further developed for kinematic applications. The project is embedded in the European Social Fund. It is a follow-up project in the area of static positioning with single GNSS frequency receivers [KORTH and HOFMANN, 2011].

Conference paper (PDF, 3314 KB)

Citation: Stempfhuber, W. and Buchholz, M.: A PRECISE, LOW-COST RTK GNSS SYSTEM FOR UAV APPLICATIONS, Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XXXVIII-1/C22, 289-293, doi:10.5194/isprsarchives-XXXVIII-1-C22-289-2011, 2011.

BibTeX EndNote Reference Manager XML