Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-2/W3, 331-338, 2017
http://www.int-arch-photogramm-remote-sens-spatial-inf-sci.net/XLII-2-W3/331/2017/
doi:10.5194/isprs-archives-XLII-2-W3-331-2017
 
23 Feb 2017
A GEOMETRIC PROCESSING WORKFLOW FOR TRANSFORMING REALITY-BASED 3D MODELS IN VOLUMETRIC MESHES SUITABLE FOR FEA
S. Gonizzi Barsanti and G. Guidi Department of Mechanical Engineering – Politecnico di Milano, Italy
Keywords: Mesh Processing, Surface Mesh, Volumetric models, Structural Analysis, FEA Abstract. Conservation of Cultural Heritage is a key issue and structural changes and damages can influence the mechanical behaviour of artefacts and buildings. The use of Finite Elements Methods (FEM) for mechanical analysis is largely used in modelling stress behaviour. The typical workflow involves the use of CAD 3D models made by Non-Uniform Rational B-splines (NURBS) surfaces, representing the ideal shape of the object to be simulated. Nowadays, 3D documentation of CH has been widely developed through reality-based approaches, but the models are not suitable for a direct use in FEA: the mesh has in fact to be converted to volumetric, and the density has to be reduced since the computational complexity of a FEA grows exponentially with the number of nodes.

The focus of this paper is to present a new method aiming at generate the most accurate 3D representation of a real artefact from highly accurate 3D digital models derived from reality-based techniques, maintaining the accuracy of the high-resolution polygonal models in the solid ones. The approach proposed is based on a wise use of retopology procedures and a transformation of this model to a mathematical one made by NURBS surfaces suitable for being processed by volumetric meshers typically embedded in standard FEM packages. The strong simplification with little loss of consistency possible with the retopology step is used for maintaining as much coherence as possible between the original acquired mesh and the simplified model, creating in the meantime a topology that is more favourable for the automatic NURBS conversion.

Conference paper (PDF, 2629 KB)


Citation: Gonizzi Barsanti, S. and Guidi, G.: A GEOMETRIC PROCESSING WORKFLOW FOR TRANSFORMING REALITY-BASED 3D MODELS IN VOLUMETRIC MESHES SUITABLE FOR FEA, Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-2/W3, 331-338, doi:10.5194/isprs-archives-XLII-2-W3-331-2017, 2017.

BibTeX EndNote Reference Manager XML