Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLI-B7, 47-54, 2016
http://www.int-arch-photogramm-remote-sens-spatial-inf-sci.net/XLI-B7/47/2016/
doi:10.5194/isprs-archives-XLI-B7-47-2016
 
17 Jun 2016
ACCELERATION OF TOPOGRAPHIC MAP PRODUCTION USING SEMI-AUTOMATIC DTM FROM DSM RADAR DATA
Aldino Rizaldy and Ratna Mayasari Jl. Raya Jakarta-Bogor KM.46, Cibinong 16911, Bogor, Indonesia
Keywords: Automatic DTM, Classification, Topographic Map Abstract. Badan Informasi Geospasial (BIG) is government institution in Indonesia which is responsible to provide Topographic Map at several map scale. For medium map scale, e.g. 1:25.000 or 1:50.000, DSM from Radar data is very good solution since Radar is able to penetrate cloud that usually covering tropical area in Indonesia. DSM Radar is produced using Radargrammetry and Interferrometry technique. The conventional method of DTM production is using “stereo-mate”, the stereo image created from DSM Radar and ORRI (Ortho Rectified Radar Image), and human operator will digitizing masspoint and breakline manually using digital stereoplotter workstation. This technique is accurate but very costly and time consuming, also needs large resource of human operator. Since DSMs are already generated, it is possible to filter DSM to DTM using several techniques. This paper will study the possibility of DSM to DTM filtering using technique that usually used in point cloud LIDAR filtering. Accuracy of this method will also be calculated using enough numbers of check points. If the accuracy meets the requirement, this method is very potential to accelerate the production of Topographic Map in Indonesia.
Conference paper (PDF, 1721 KB)


Citation: Rizaldy, A. and Mayasari, R.: ACCELERATION OF TOPOGRAPHIC MAP PRODUCTION USING SEMI-AUTOMATIC DTM FROM DSM RADAR DATA, Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLI-B7, 47-54, doi:10.5194/isprs-archives-XLI-B7-47-2016, 2016.

BibTeX EndNote Reference Manager XML