Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLI-B3, 561-565, 2016
09 Jun 2016
Muhamad Alrajhi, Zafare Alam, Mohammad Afroz Khan, and Abdalla Alobeid Dept. of Surveying and Mapping, Ministry of Municipal and Rural Affairs, Riyadh Olaya KSA
Keywords: 3D City Modelling, DSM, Orthophoto, Oblique Imagery, Mesh Point, Wire Frame, Stereopairs, GSD Abstract. Ministry of Municipal and Rural Affairs (MOMRA), aims to establish solid infrastructure required for 3D city modelling, for decision making to set a mark in urban development. MOMRA is responsible for the large scale mapping 1:1,000; 1:2,500; 1:10,000 and 1:20,000 scales for 10cm, 20cm and 40 GSD with Aerial Triangulation data. As 3D city models are increasingly used for the presentation exploration, and evaluation of urban and architectural designs. Visualization capabilities and animations support of upcoming 3D geo-information technologies empower architects, urban planners, and authorities to visualize and analyze urban and architectural designs in the context of the existing situation. To make use of this possibility, first of all 3D city model has to be created for which MOMRA uses the Aerial Triangulation data and aerial imagery. The main concise for 3D city modelling in the Kingdom of Saudi Arabia exists due to uneven surface and undulations. Thus real time 3D visualization and interactive exploration support planning processes by providing multiple stakeholders such as decision maker, architects, urban planners, authorities, citizens or investors with a three – dimensional model. Apart from advanced visualization, these 3D city models can be helpful for dealing with natural hazards and provide various possibilities to deal with exotic conditions by better and advanced viewing technological infrastructure. Riyadh on one side is 5700m above sea level and on the other hand Abha city is 2300m, this uneven terrain represents a drastic change of surface in the Kingdom, for which 3D city models provide valuable solutions with all possible opportunities. In this research paper: influence of different GSD (Ground Sample Distance) aerial imagery with Aerial Triangulation is used for 3D visualization in different region of the Kingdom, to check which scale is more sophisticated for obtaining better results and is cost manageable, with GSD (7.5cm, 10cm, 20cm and 40cm). The comparison test is carried out in Bentley environment to check the best possible results obtained through operating different batch processes.
Conference paper (PDF, 1196 KB)

Citation: Alrajhi, M., Alam, Z., Khan, M. A., and Alobeid, A.: INFLUENCE OF GSD FOR 3D CITY MODELING AND VISUALIZATION FROM AERIAL IMAGERY, Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLI-B3, 561-565, doi:10.5194/isprs-archives-XLI-B3-561-2016, 2016.

BibTeX EndNote Reference Manager XML