Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XL-5/W3, 63-71, 2013
© Author(s) 2013. This work is distributed
under the Creative Commons Attribution 3.0 License.
07 Jan 2014
L. Biagi, L. Carcano, A. Lucchese, and M. Negretti Politecnico di Milano – DICA, Geomatics Laboratory at Como Campus, Via Valleggio 11, 22100 Como, Italy
Keywords: DEM/DTM, Multiresolution, Accuracy, GPS, RTK Abstract. The work is part of "HELI-DEM" (HELvetia-Italy Digital Elevation Model) project, funded by the European Regional Development Fund within the Italy-Switzerland cooperation program.

The aim of the project is the creation of a unique DTM for the alpine and subalpine area between Italy (Piedmont, Lombardy) and Switzerland (Ticino and Grisons Cantons); at present, different DTMs, that are in different reference frames and have been obtained with different technologies, accuracies, and resolutions, have been acquired. The final DTM should be correctly georeferenced and produced validating and integrating the data that are available for the project. DTMs are fundamental in hydrogeological studies, especially in alpine areas where hydrogeological risks may exist. Moreover, when an event, like for example a landslide, happens at the border between countries, a unique and integrated DTM which covers the interest area is useful to analyze the scenario. In this sense, HELI-DEM project is helpful.

To perform analyses along the borders between countries, transnational geographic information is needed: a transnational DTM can be obtained by merging regional low resolution DTMs. Moreover high resolution local DTMs should be used where they are available. To be merged, low and high resolution DTMs should be in the same three dimensional reference frame, should not present biases and should be consistent in the overlapping areas. Cross-validation between the different DTMs is therefore needed.

Two different problems should be solved: the merging of regional, partly overlapping low and medium resolution DTMs into a unique low/medium resolution DTM and the merging with other local high resolution/high accuracy height data.

This paper discusses the preliminary processing of the data for the fusion of low and high resolution DTMs in a study-case area within the Lombardy region: Valtellina valley. In this region the Lombardy regional low resolution DTM is available, with a horizontal resolution of 20 meters; in addition a LiDAR DTM with a horizontal resolution of 1 meter, which covers only the main hydrographic basins, is also available. The two DTMs have been transformed into the same reference frame. The cross-validation of the two datasets has been performed comparing the low resolution DTM with the local high resolution DTM. Then, where significant differences are present, GPS survey have been used as external validation. The results are presented. Moreover, a possible strategy for the future fusion of the data, is shortly summarized at the end of the paper.

Conference paper (PDF, 1260 KB)

Citation: Biagi, L., Carcano, L., Lucchese, A., and Negretti, M.: CREATION OF A MULTIRESOLUTION AND MULTIACCURACY DTM: PROBLEMS AND SOLUTIONS FOR HELI-DEM CASE STUDY, Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XL-5/W3, 63-71, doi:10.5194/isprsarchives-XL-5-W3-63-2013, 2013.

BibTeX EndNote Reference Manager XML