Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XL-1/W3, 309-314, 2013
http://www.int-arch-photogramm-remote-sens-spatial-inf-sci.net/XL-1-W3/309/2013/
doi:10.5194/isprsarchives-XL-1-W3-309-2013
© Author(s) 2013. This work is distributed
under the Creative Commons Attribution 3.0 License.
 
24 Sep 2013
POSITIONING BASED ON INTEGRATION OF MUTI-SENSOR SYSTEMS USING KALMAN FILTER AND LEAST SQUARE ADJUSTMENT
M. Omidalizarandi and Z. Cao University of Stuttgart, Dept. of Geomatics Engineering, Geschwister-Scholl-Str. 24D, 70174, Stuttgart, Germany
Keywords: Sensor fusion, Kalman Filter, Least Square Adjustment, Calibration, Dead Reckoning Abstract. Sensor fusion is to combine different sensor data from different sources in order to make a more accurate model. In this research, different sensors (Optical Speed Sensor, Bosch Sensor, Odometer, XSENS, Silicon and GPS receiver) have been utilized to obtain different kinds of datasets to implement the multi-sensor system and comparing the accuracy of the each sensor with other sensors. The scope of this research is to estimate the current position and orientation of the Van. The Van's position can also be estimated by integrating its velocity and direction over time. To make these components work, it needs an interface that can bridge each other in a data acquisition module. The interface of this research has been developed based on using Labview software environment. Data have been transferred to PC via A/D convertor (LabJack) and make a connection to PC. In order to synchronize all the sensors, calibration parameters of each sensor is determined in preparatory step. Each sensor delivers result in a sensor specific coordinate system that contains different location on the object, different definition of coordinate axes and different dimensions and units. Different test scenarios (Straight line approach and Circle approach) with different algorithms (Kalman Filter, Least square Adjustment) have been examined and the results of the different approaches are compared together.
Conference paper (PDF, 968 KB)


Citation: Omidalizarandi, M. and Cao, Z.: POSITIONING BASED ON INTEGRATION OF MUTI-SENSOR SYSTEMS USING KALMAN FILTER AND LEAST SQUARE ADJUSTMENT, Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XL-1/W3, 309-314, doi:10.5194/isprsarchives-XL-1-W3-309-2013, 2013.

BibTeX EndNote Reference Manager XML